Panasonic NPM-TT2 twin tray assembly platform chip mounter
Basic Specification
Direct connectivity with NPM-D3/W2
Placement head (Lightweight 8- nozzle head & 3-nozzle head V2)
Selectable & configurable supply unit spec
Adoption of Multi Recognition Camera
Alternate & independent mounting support
Changeover capability
Multi Recognition Camera
High productivity through fully independent placement
Support Pin Automatic Change (option)
Productivity/Versatility
Feeder cart changeover spec（option）
Inspection option before pick-up
Transfer Unit（option）
|
Model ID
|
NPM-TT2
|
|
PCB
dimensions
(mm)
|
PC size
|
Single-lane mode
|
L 50 x W 50 ~ L 510 x W 590
|
|
Dual-lane mode
|
L 50 x W 50 ~ L 510 x W 300
|
|
M size
|
Single-lane mode
|
L 50 x W 50 ~ L 510 x W 510
|
|
Dual-lane mode
|
L 50 x W 50 ~ L 510 x W 260
|
|
PCB exchange time
|
Single-lane mode
|
4.0 s (With no component mounted on the reverse side of PCB)
|
|
Dual-lane mode
|
0 s* *No 0s when cycle time is 4.0 s or less
|
|
Electric source
|
3-phase AC 200, 220, 380, 400, 420, 480 V 2.5 kVA
|
|
Pneumatic source
|
Min.0.5 MPa, 200 L /min (A.N.R.)
|
|
Dimensions *1 (mm)
|
W 1 300*2 x D 2 798*3 x H 1 444*4
|
|
Mass
|
2 690 kg
(Only for main body:This differs depending on the option configuration.
|
|
Placement head
|
Lightweight 8-nozzle head
(Per head)
|
3-nozzle head V2 *5
(Per head)
|
|
Placement speed
|
PC size
|
18 000 cph (0.20 s/chip)
|
7 200 cph (0.50 s/chip)
5 900 cph (0.61 s/QFP)
|
|
M size
|
17 460 cph (0.21s/chip)
|
6 984 cph (0.52 s/chip)
5 723 cph (0.63 s/QFP)
|
|
Placement accuracy
(Cpk 1)
|
± 40 µm/chip
± 30 µm/QFP  12mm to  32mm
± 50 µm/QFP  12mm Under
|
±40 μm/ chip
±30 μm/ QFP
|
|
Component
dimensions
(mm)
|
0402 chip*6 to L 32 x W 32 x T 12
|
0603 chip to L 150 x W 25 (diagonal152) x T 30
|
|
Component
supply
|
Taping
|
Tape : 4 to 56 / 72 mm
|
Tape : 4 to 56 / 72 / 88 / 104 mm
|
|
Specifications for front/rear tray feeders : Max.52
Specifications for front/rear feeder carts : Max.120 (Tape:4, 8 mm)
|
|
Stick
|
Specifications for front/rear tray feeders : Max.12 (Single stick feeder)
|
|
Specifications for front/rear feeder carts : Max.28 (Single stick feeder)
|
|
Tray
|
Max.40 (Front supply unit : Max. 20 + Rear supply unit : Max. 20)
|
*1 : Only for main body
*2 : 1 820 mm in width if extension conveyors (260 mm) are placed on both sides
*3 : Dimensions shown are specifications for front/rear tray feeders . Dimensions of specifications for front/rear feeder carts : 2 893 mm
*4 : Excluding the monitor, signal tower and ceiling fan cover.
*5 : 3-nozzle head V2 cannot be installed on NPM-D3
*6 : The 0402 chip requires a specific nozzle/feeder.
*Placement tact time, inspection time and accuracy values may differ slightly depending on conditions.
*Please refer to the specification booklet for details.
Keywords:
Panasonic mount, panasonic mounter, Panasonic pick and place machine, Panasonic CM202, CM202,Panasonic placement machine, Panasonic chip mounter, Panasonic chip shooter, Panasonic smt machine, Panasonic smd machine, smt machine, smt pick and place machine, smd pick and place machine, surface mount technology, second-hand CM202, second hand Panasonic pick and place machine, second-hand Panasonic chip mounter, used Panasonic machine, used chip mounter...NPM-TT2
The other machines you might looking for:
Lead free reflow oven, solder paste printer, pcb linking conveyor, solder paste inspection machine, assembly line, wave solder...
please kindly click the above keyword to see the more detailed machine.
Elaine
+86 18898671670
Wechat: czsffy1223
Skype: elaine19920114
E-mail: elaine(@)s chine.com / smttechpnp(@)gmail.com
http://www.s chine.com
